50W 60W 72W open frame switching power supply Factory

Specifications for this item

* Ultra small shape design, easy to install.

* Full load operation, low temperature rise

* Refer to safety requirements, isolation withstand voltage is greater than 1500VAC.

* Refer to EMC design, can be certified, low ripple processing.

* Optional synchronous rectification technology, higher efficiency and lower temperature rise.

* Output short-circuit, over-current, over-power protection functions are perfect.

Send email to us

Product Detail

Product Tags

Electrical Parameters/Specifications：

Model No		TA65-5V10A	TA65-12V5A	TA65-24V3A	TA65-36V2A
Output	DC voltage	5V	12V	24V	36V
	Rated current	10A	5A	3A	2A
	Current range	0-10A	0-5A	0-3A	0-2A
	rated power	50W	60W	72W	72W
	Ripple and Noise (Maximum)	50mVp-p	100mVp-p	120mVp-p	150mVp-p
	Voltage accuracy	±5%	±3%	±3%	±3%
	Linear adjustment rate	±0.5%	±0.5%	±0.5%	±0.5%
	Load Regulation	±1%	±1%	±1%	±1%
	Efficiency (TYP)	88%	85%	88%	89%
	Voltage adjustment range	not adjustable
	Start-up, rise time	1500ms,30ms/220VAC 2500ms,30ms/110VAC(full load）
Input	voltage range	VAC100-240V(85-264V) VDC127~370V (Please refer to "Derating Curve")
	Frequency Range	50/60Hz
	AC current (TYP)	0.6A/220VAC,1.2A/100V		0.65A/220VAC,1.25A/100V
	Inrush current (TYP)	COLD START 45A
	leakage current	<2mA/240VAC
Current Protection	short circuit	Protection mode: hiccup mode, automatic recovery after abnormal condition is removed
	over current	110%~200% of rated output current
	over power	110%~200% of rated output power
Environmental	Operating temperature	﹣20～﹢60℃ (Please refer to "Derating Curve")
	Working humidity	20~90%RH, no condensation
	Storage temperature and humidity	﹣40～﹢85℃,10～95%RH
	Vibration resistant	10～500Hz, 2G 10 minutes/cycle, X, Y, Z axis each 60 minutes
Safety and Electromagnetic Compatibility	safety regulations	Refer to CE, CCC, IT general standard design, actually need your company to pass the test according to the certification requirements
	Pressure resistance	I/P-O/P:3KVAC
	Insulation resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
	Electromagnetic Compatibility Emissions	Refer to CE, CCC, IT general standard design, actually need your company to pass the test according to the certification requirements
	Electromagnetic Compatibility Immunity	Refer to CE, CCC, IT general standard design, actually need your company to pass the test according to the certification requirements
Mechanical	Size (LWH)	1305030mm(LWH）
Mechanical	weight	About0.5Kg/PCS

Remarks:

Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.

Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.

Accuracy: including setting error, linear adjustment rate and load adjustment rate.

Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.

Load regulation measurement method: From 0% to 100% rated load.

The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.