Products

High quality LED Light PCB harness cable assembly factory

Specifications for this item

Model No: KY-C062

Product name: Wire harness

Wire description:

① UL1007-20AWG Red Black Wire,Cut line length L=500mm (each 1Pcs)
② UL1007-28AWG Red 2 White2 Blue1 Green1 Yellow1 Black1,Cut line length L=500mm (each 500mm)
③ UL1007-28AWG Red Black,Cut line length L=100mm (each 1Pcs)
④ Terminal:SAN-Push-in terminal (10pcs)
⑤ Plastic shell: SAN-8P Push-in terminal (1pcs)
⑥ Plastic shell: SAN-2P Push-in terminal (1pcs)
⑦ Terminal: SMH- male terminal (9pcs)
⑧ Plastic shell: SMH-2P Female Plastic shell (White) (1pcs)
⑨ Plastic shell: SMH-4P Female Plastic shell (White) (1pcs)
⑩ Plastic shell: SMH-3P Female Plastic shell (White) (1pcs)
⑪ Terminal: SMH- Female terminal (5pcs)
⑫ Plastic shell: SMH-5P male Plastic shell (White) (1pcs)
⑬ Heat shrink tube: φ8.0x295mm heat shrink tube (1pcs)


Product Detail

Product Tags

Detail Introduction

① UL1007-28AWG wire, L=500mm, the conductor uses tinned copper, PVC environmental protection insulation; the rated temperature of the wire is 80℃, and the rated voltage is 300V;

Product Features And Application

① Using standard thickness wire, it is easy to strip and cut off.

② The terminal and the rubber shell are in firm contacting, assembling accurate and in place, fixing good, preventing power off, and ensuring the stable connection between the power transmission control system and the signal.

Wire Harness KY-C062 (4)

Scenes To Be Used

① Used for patch terminal wire on LED light bar, PCB board connection wire on some small instruments, etc.

Materials Type

① The conductor uses tinned copper, PVC environmental protection insulation;

② The plastic shell is made of environmentally friendly ABS material;

③ The terminals are tinned environmentally friendly.

Production Process

① Use the  production process by fully automatic shell-piercing machine 

Quality Control

① The wire has passed UL.VW-1 and CSA FT1, vertical burning test.

② The product 100% has passed the continuity test, withstand voltage test, and tensile strength test.

③ The product has passed the wire sequence inspection to ensure that the colors of the wire are correctly inserted into the port.

Appearance Requirements

1. The surface of the wire colloid should be smooth, flat, uniform in color, without mechanical damage, and clear in printing

2. The wire colloid must not have the phenomenon of lack of glue, oxygen skin, variegated color, stains and so on.

3. The finished product size must meet the drawing requirements


  • Previous:
  • Next:

  • Write your message here and send it to us