Products

Small indoor appliances home appliances harness cable assembly

Specifications for this item

Model No: KY-C063

Product name: Wire harness

① Wire description: VDE three-core 0.75 square (black, red, yellow note green) Cut line length 400mm (1pcs)

② UL1007-18AWG Wire,Cut line length L=180mm-Yellow note green (1pcs)

③ Terminal: E2510 red copper tube terminal (3pcs

④ Ring terminal: 4.2 ring red ( 2pcs)

⑤ Heat shrink tube: φ7×20 Black Heat shrink tube (2pcs)

⑥ bullet head: MPD2-156 bullet head Male and Female (1 Set)


Product Detail

Product Tags

Detail Introduction

① VDE-0.75 square-three-core round wire, wire length 180mm, conductor number/wire diameter 24/0.2, cross-sectional area 0.75mm², rated temperature: 70℃, rated voltage 300/500V; rated current 6A.

Product Features And Application

① Using standard thickness wire, it is easy to strip and cut off.

② The terminal and the rubber shell are in firm contacting, assembling accurate and in place, fixing good, preventing power off, and ensuring the stable connection between the power transmission control system and the signal.

c070 (5)

Scenes To Be Used

① Used for power supply cables of small indoor appliances and home appliances

Materials Type

① The conductor uses stranded bare copper wire, PVC environmental protection insulation, and PVC sheath;

② The color of E2510 red copper pipe is distinguished according to the national standard color code, which is convenient to distinguish the wire range, make the wiring level clear, neat and beautiful

Production Process

① Using automatic terminal crimping production process;

Quality Control

① The wire meets DIN and VDE0281 certification standard.

② The products 100% have passed the continuity test, withstand voltage test, tensile strength test, etc. The products have passed the wire sequence inspection to ensure that the colors of the wire are correctly inserted into the port.

Appearance Requirements

1. The surface of the wire colloid should be smooth, flat, uniform in color, without mechanical damage, and clear in printing

2. The wire colloid must not have the phenomenon of lack of glue, oxygen skin, variegated color, stains and so on.

3. The finished product size must meet the drawing requirements


  • Previous:
  • Next:

  • Write your message here and send it to us