Products

US 2 pin plug to figure 8 power cord

Specifications for this item

Item Code: KY-C087

Certificate:ETL

Model: 18AWG (2*0.824mm2) flat Cable

Length:1000mm

Conductor:Standard copper conductor

Rated Voltage:125V

Rated Current:2.5A

Jacket:PVC outer cover

Color:black


Product Detail

Product Tags

Product Details

Technical requirements

1. All materials must comply with the latest ROHS&REACH standards and environmental protection requirements

2. The mechanical and electrical properties of plugs and wires must comply with the ETL standard

3. The writing on the power cord must be clear, and the appearance of the product must be kept clean

Electrical performance test

1. There should be no short circuit, short circuit and polarity reversal in the continuity test

2. The pole-to-pole withstand voltage test is 2000V 50Hz/1 second, and there should be no breakdown

3. The pole-to-pole withstand voltage test is 4000V 50Hz/1 second, and there should be no breakdown

4. The insulated core wire should not be damaged by stripping the sheath

Product application range

Power cord is use for below end Electronic equipments:

1. Scanner

2. Copier

3. Printer

4. Bar code machine

5. Computer host

6. Monitor

7. Rice cooker

8. Electric kettle

9. Air Conditioner

10. Microwave oven

11. Electric frying pan

12. Washing Mach

FAQs

May I know the status of my order?

Yes .The order information and photos at different production stage of your order will be sent to you and the information will be updated in time.

Scope of application

Precautions:

1.During the tensile test, the rear leg of the terminal must not be riveted with insulation to prevent the rear leg from being stressed

2. The tension meter must be within the valid inspection period, and the meter must be reset to zero before the test

3. Tensile strength (tensile strength) shall be judged according to the drawing description if the customer has requirements, and shall be judged according to the conductor compression tensile force standard if the customer has no tensile requirements

Common defective Phenomenon:

1.Confirm whether the tension meter is within the valid inspection period and whether the meter is reset to zero

2.Whether the tensile force that the terminal can withstand conforms to the conductor compression tensile force standard)

Put defective products in the red plastic box


  • Previous:
  • Next:

  • Write your message here and send it to us