High-Quality 100W 200W Open Frame Switching Power Supply

Specifications for this item

* Ultra small shape design, easy to install

* Full load operation, low temperature rise

* Meet safety requirements, and isolation withstand voltage is greater than 3000VAC

*Compliant with EMC design, can be certified, low ripple processing.

*Optional synchronous rectification technology, higher efficiency and lower temperature rise.

* Output short circuit, over current, over power protection functions are perfect.

Send email to us

Product Detail

Product Tags

Electrical Parameters/Specifications：

Model No		TASC120-12V8A	TASC120-12V10	TASC120-24V4A	TASC120-24V5A
Output	DC voltage	12V	12V	24V	24V
	Rated current (natural cooling)	8A	10A	4A	5A
	Current range	0-8A	0-10A	0-4A	0-5A
	Rated power (free cooling)	100W	120W	100W	120W
	Ripple and Noise (Maximum)	100mVp-p	100mVp-p	120mVp-p	120mVp-p
	Voltage accuracy	±2%	±2%	±2%	±2%
	Linear adjustment rate	±0.5%	±0.5%	±0.5%	±0.5%
	Load Regulation	±0.5%	±0.5%	±0.5%	±0.5%
	Efficiency (TYP)	88%（220V MAX）	88%（220V MAX）	87%（220V MAX）	87%（220V MAX）
	Voltage adjustment range	10.5V~14.0V	10.5V~14.0V	22.5V~26.0V	22.5V~26.0V
	Start-up, rise time	1500ms,30ms/220VAC 2500ms,30ms/110VAC(full load）
Input	voltage range	VAC90-264V VDC127~370V (Please refer to "Derating Curve")
	Frequency Range	47~63Hz
	AC current (TYP)	1.1A/220VAC,2.2A/110V
	Inrush current (TYP)	COLD START 45A
	leakage current	<2mA/240VAC
Current Protection	short circuit	Protection mode: hiccup mode, automatic recovery after abnormal condition is removed
	over current	110%~200% of rated output current
	over power	110%~200% of rated output power
Environmental	Operating temperature	﹣20～﹢60℃ (Please refer to "Derating Curve")
	Working humidity	20~90%RH, no condensation
	Storage temperature and humidity	﹣40～﹢85℃,10～95%RH
	Vibration resistant	10～500Hz, 2G 10 minutes/cycle, X, Y, Z axis each 60 minutes
Safety and Electromagnetic Compatibility	safety regulations	Refer to CE, CCC, IT, general standard design for home appliances (requires the whole product test to determine whether the parameters pass)
	Pressure resistance	I/P-O/P:3KVAC
	Insulation resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70%RH
	Electromagnetic Compatibility Emissions	Refer to CE, CCC, IT, general standard design for home appliances (requires the whole product test to determine whether the parameters pass)
	Electromagnetic Compatibility Immunity	Refer to CE, CCC, IT, general standard design for home appliances (requires the whole product test to determine whether the parameters pass)
Mechanical	Size (LWH)	101.650.836mm(LWH）
Mechanical	weight	About0.7Kg/PCS

Remarks:

Unless otherwise specified, all specifications are measured under the input of 220VAC, rated load, and 25°C ambient temperature.

Ripple and noise measurement method: use a 30CM twisted pair cable, and the terminals should be connected in parallel with 0.1uf and 47uf capacitors, and measure at 20MHZ bandwidth.

Accuracy: including setting error, linear adjustment rate and load adjustment rate.

Linear adjustment rate measurement method: under rated load, from low voltage to high voltage test.

Load regulation measurement method: from 0% to 100% rated load.

The power supply should be regarded as a part of the components in the system, and the relevant confirmation of electromagnetic compatibility should be carried out in conjunction with the terminal equipment.